Electric linear actuator STR 0PA
| Type number: |
430 |
|
| Switching-off thrust: |
360 to 4500 |
[N] |
| Operating speed: |
5 to 40 |
[mm/min] |
| Operating stroke: |
10 to 40 |
[mm] |
| Ambient temperature: |
-25 to +55 |
[°C] |
| Protection enclosure: |
IP 67 |
|
| Operating position: |
any position |
|
| Weight: |
2,5 to 4,5 |
[kg] |
Standard equipment and functions
- Supply voltage 230 V AC
- Terminal board connection
- Switching off in limit positions from the position or thrust
- Torque (thrust) blocking in limit positions
- Torque (thrust) blocking during the start
- 2 freely programmable relays RE1, RE2
- Relay READY
- Control by unified signal 0/4 – 20 mA, 4 – 12 mA, 12 – 20 mA,
or 0/2 – 10 V (not for DMS3 in 2P version)
- Control voltage for remote control 24 V DC
- Impulse control (inching duty)
- Timing mode / regime of operation
- Safety function ESD (failure reaction)
- Electronic position transmitter 4 – 20 mA passive (not for DMS3 in 2P version)
- Output for failure messages
- Space heater operated by control unit
- Communication interface RS 232
- Program for parameters setting through PC
- Mechanical connection – pillar
- Manual control
Additional equipment
- Supply voltage 220 V AC, 24 V AC
Documents
General conditions
Technical data sheet
DMS3
Installation instructions
Installation instructions – Control unit
