Electric part-turn actuator SPR 0PA
Type number: |
230 |
|
Max. load torque: |
40 |
[Nm] |
Operating time: |
15 to 130 |
[s/90°] |
Operating angle: |
60° to 360° |
|
Ambient temperature: |
-25 to +55 |
[°C] |
Protection enclosure: |
IP 67 |
|
Operating position: |
any position |
|
Weight: |
1,4 to 2,4 |
[kg] |
Standard equipment and functions DMS3
- Supply voltage 230 V AC
- Terminal board connection
- Switching off in limit positions
- 2 freely programmable relays RE1, RE2
- Relay READY
- Control by unified signal 0/4 – 20 mA, 4 – 12 mA, 12 – 20 mA,
or 0/2 – 10 V (not for DMS3 in 2P version)
- Control voltage for remote control 24 V DC
- Impulse control (inching duty)
- Timing mode / regime of operation
- Safety function ESD (failure reaction)
- Electronic position transmitter 4-20 mA passive (not for DMS3 in 2P
version)
- Output for failure messages
- Space heater operated by control unit
- Communication interface RS 232
- Programme for parameters setting by PC
- Mechanical connection – flange ISO 5211
- Manual control
Additional equipment
- Supply voltage 220 V AC, 24 V AC
- Mechanical connection ISO 5211 – flange F05, F07 with bracket
- Mechanical stop ends
- Version with stand, lever and pull-rod
Documents
General conditions
Technical data sheet
DMS3
Installation instructions
Installation instructions – Control unit